COMSTAT PROVIDES EXPERT KNOWLEDGE OF ENGINEERED THERMAL SENSING AND LOAD SWITCHING PRODUCTS
Specially designed for low voltage DC/AC applications from 6 to 48 volts, we carry the below models for immediate delivery. These Cartridge heaters are a highly compacted swaged design made with high purity magnesium oxide fill for maximum temperature and longer life than standard cartridge heaters.
Heaters can be run be operated between 6 and 48 volts if not exceeding amperage of maximum 6 Amps for 1/4" and 3.6 amps for 1/8" models.
Product Name | Comstat Part Number- | OEM Part Number | Min. Order Qty. | Diameter | Length | |||
High Density Cartridge Heater 12V/30W |
MCH2-80W-001 |
Comstat Stock |
5 |
1/8 inch | 2.0" | |||
High Density Caratridge Heater 30V/78W |
MCH2-50W-004 |
Comstat Stock |
5 |
1/8 inch | 2.75" | |||
High Density Cartridge Heater 12V/13W |
MCH2-50W-003 |
Stock |
5 |
1/8 inch | 1.75" | |||
High Density Cartridge Heater 12V/10W |
MCH2-40W-002 |
Comstat Stock |
5 |
1/8 inch | 1.25" | |||
High Density Cartridge Heater 12V/7.5W |
MCH2-30W-001 |
Comstat Stock |
5 |
1/8 inch | 1.0" | |||
High Density Cartridge Heater 12V/24W |
MCH1-96W-005 |
Comstat Stock |
5 |
1/4 inch | 3.0" | |||
High Density Cartridge Heater 12V/18W |
MCH1-70W-003 |
Comstat Stock |
5 |
1/4 inch | 1.75" | |||
High Density Cartridge Heater 12V/14W |
MCH1-58W-004 |
Comstat Stock |
5 |
1/4 inch | 2.0" | |||
High Density Cartridge Heater 12V/10W |
MCH1-38W-003 |
Comstat Stock |
5 |
1/4 inch | 1.0" | |||
High Density Cartridge Heater 12V/54W |
MCH1-240W-004 |
Comstat Stock |
5 |
1/4 inch | 2" | |||
High Density Cartridge Heater 12V/40W |
MCH1-12-40W-01 |
Comstat Stock |
5 |
1/4 inch | 1" |
Displaying 1 to 11 (of 11 products) | Result Pages: 1 |
Request a quote on OEM volumes or specific requirements. Typical Lead time is 2-4 weeks for non-stock heaters.
Comstat maintains an in stock inventory of a diverse assortment of low voltage cartridge heaters for product applications with design voltages between 12 and 48 volts. In stock standard products allow us to ship most orders immediately and with a low $50 minimum order.
We also work with customers on design specific requirements for cartridge heaters in standard diameters from 1/8 inch to 1” and metric diameters from 6.5 mm to 20mm and voltages up to 480V.
Options Available:
If you are an OEM in need of a custom heater, whether it’s a cartridge heater, sheathed metal heater, ceramic heater or flexible heater, please contact us to speak directly with a member of the highly knowledgeable Comstat team or fill out our quote request form and challenge us with your electric heater, thermal control component, cost or delivery needs.